zdig1

I CamCU full

Overview
iCamCU is a remotely controlled audio, video, telephony and still image recorder. It waits for an SMS to trigger the recording and sends back the information in the form of a multi-media message (MMS.)
iCamCU provides an access control mechanism to prevent unwanted requests.
Pre-requisites
The phone that iCamCU is installed on must be configured to allow the sending of MMS messages, using the default messaging application. Please contact your network operator for assistance.
The client phone(s) must be capable of sending SMS messages and receiving MMS messages. iCamCU does NOT need to be installed on the client phone.
Install iCamCU
When you buy iCamCU over the internet a WAP Push message will be sent to your phone with a URL link to the application module. This allows you to download and install the application by simple key presses, these are the responses for a typical phone,
Go to your inbox and select the iCamCU message
Select the link in the message and use the download option
When requested to connect to server, YES
If you get a security warning ‘can’t verify supplier, continue? YES
Install iCamCU? YES
Install? OK
Install in Phone memory or Card memory? Phone
At this point the installation should be complete.

Run iCamCU
Find the iCamCU icon on your application screen (could be in the My Own folder)
Select the application
The first time you run the application it will go through a registration process indicated on the screen which typically takes about 20 seconds, at the end of this process the camera screen should be displayed,
Select options
Select settings
At this point you will get the settings icons displayed on the screen,
Contrast, Brightness, Zoom, Exposure, Capture Size, Jpeg Quality, Video Size, Flash, Length, Access Permissions, and the Information Log.
These may be adjusted for your particular preference using the left and right keys to select and the up and down keys to change. You should note that Network Operators sometimes limit the size of MMS messages so large images (e.g. greater than 640 x 480) or long Length times for sound may not be allowed. Some phones may not allow all these options to be modified.
Hide iCamCU
You can Hide the iCamCU application by selecting the Hide option. This means that iCamCU operates in background mode so you can select other applications as required. Notice also that iCamCU drops into sleep mode after about 10 seconds of no activity in order to conserve battery life. You should not notice any significant degradation of battery life in your phone.
Access iCamCUFrom a standard MMS enabled phone (most modern phones have this) compose an SMS message to the number of the phone on which you have installed iCamCU and in the subject field enter,
ipic to request a still photo
ivid to request a video as selected by the length setting in options
irec to request a sound recording as selected by the length setting in options
imov to initialise motion detection
The iCamCU phone will receive the SMS message, obey the instruction and send to this phone an MMS message containing the photo, video, or sound clip. You should find this in the MMS inbox on your phone.
Configuring iCamCU
From the Options menu, select Settings. iCamCU will display a list of icons across the top of the screen. To navigate these items use the left and right arrow keys. To change the settings under a particular selection, use the up and down arrow keys.
Please note that these options depend on the capabilities of your phone. For example, still-image capture size settings will only present those options that your camera hardware allows.
Access Control
Access control can be configured under the Settings menu. There are three options available.
Allow Everyone: iCamCU will process requests originating from any phone.
Contacts Only: iCamCU will only process those requests which originate from a number present in your phone's contact database.
iCamCU Group Only: iCamCU will only process those requests which originate from a number present in the ICAMCU group (folder) in your phone's contact database.
iCamCU automatically generates this group when it is launched. To add or remove entries from this group please use your phones default contacts management application.
ICamCU costs £39.48 (inc VAT)


Compatible Sets:
Nokia N90
Nokia N70
Nokia 6630
Nokia 6680
Nokia 6681
Nokia 6682
Nokia 3230
Nokia 6620
Nokia 6260
Nokia 6670
Nokia 7610
Panasonic X700
Panasonic X800
Samsung SGH-D720

Fichiers attachés

iCamS60[1].2.3.Generic.v1.1.cracked.by.100565.zip (26,7 Ko, 5 affichages)